Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Roofers in Culver City, CA
Roof work in Culver City starts with the inspection. We look at tile, asphalt, flat roofing, flashing, and ventilation on homes built anywhere from the 1920s to last year. Culver City roofs face marine-layer moisture, salt air off Santa Monica Bay, and intense UV, which means corrosion and material breakdown show up here differently than they do ten miles inland. Call (866) 942-4187 to schedule a roof inspection and find out exactly what your roof needs.
Why Culver City Homes Are Different
Culver City sits in the Westside coastal-influence zone, so roofs here deal with a specific set of conditions. The marine layer rolls in most summer mornings and burns off by early afternoon, leaving behind moisture that settles into roofing materials. Salt-laden onshore air from the bay accelerates corrosion on metal flashing, pipe boots, and fasteners. Intense UV breaks down asphalt shingles and flat-roof coatings faster than homeowners expect. The city’s housing stock compounds the issue: 1920s and 1930s Spanish Colonial and Craftsman bungalows with original clay or concrete tile sit next to mid-century tract homes and newer high-density infill. Many of the older roofs are tile over skip-sheathing with no underlayment, so a single cracked tile sends water straight into the attic. Add small lots with tight side-yard access around Carlson Park and downtown, and every job here requires a crew that can work carefully in close quarters.
Styles & brands we work with
Our Main Culver City Services
Most Culver City homeowners call us for one of two reasons: something is leaking or the roof has reached the end of its serviceable life. Here is how each works here.
Roof Repair in Culver City
Repairs on Culver City homes often involve matching old materials, whether that is Spanish clay tile on a 1930s bungalow or composition shingles on a 1960s tract house. We replace cracked or slipped tiles, repair flashing corroded by salt air, seal flat-roof seams, and clear clogged drains before winter rains arrive. On tile-over-skip-sheathing roofs near downtown, a repair usually includes checking the area below the break for hidden dry rot. Read more about Roof Repair in Culver City.
Roof Replacement in Culver City
A full replacement in Culver City gives us the chance to fix what the original builder skipped: no underlayment, undersized drainage, or poor ventilation. We tear off down to the deck, repair or replace sheathing, install modern underlayment, and put on a roof system matched to the home’s style and the neighborhood’s character. Historic districts and HOA communities around Culver City sometimes require material approvals, and we handle that paperwork as part of the job. Learn what is involved at Roof Replacement in Culver City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Roof Inspection in Culver City
A roof inspection in Culver City tells you what is failing, what is close to failing, and what can wait. On the older bungalows near downtown and Carlson Park, original clay and concrete tile roofs often sit over skip-sheathing with no underlayment, so a single cracked or slipped tile during a winter storm lets water straight into the attic. Re-roofing crews in Culver City routinely find decades of hidden dry rot under tile that looked perfectly fine from the street. Our inspection is a standalone service, not a sales pitch. Call (866) 942-4187 to schedule yours, or see what a proper Roof Inspection covers.
Roof Inspection Services
Signs you need it
If you see water stains on ceilings after Culver City’s winter rains, curling shingles, cracked or slipped tile, or granules collecting in gutters, you need an inspection.
What it costs in Culver City
Roof inspections in Culver City typically run $150 to $400, with basic visual checks at $140 to $190 and infrared moisture scans on flat roofs at $240 to $420.
How we do it
We walk the roof surface, inspect flashings and penetrations, check the attic for moisture and ventilation issues, and document everything with photos and a written report.
Roof Estimate
Signs you need it
If a previous contractor quoted a fix without walking the roof, or you are weighing repair against replacement on an older Culver City home, get a detailed estimate.
What it costs in Culver City
Most roof estimates in Culver City are free; detailed or urgent estimates, such as for real estate transactions or insurance claims, range from $90 to $180.
How we do it
We inspect the roof, take measurements, and deliver a line-item written quote that separates materials, labor, and any structural repairs.
Free Roof Inspection
Signs you need it
If there is no active leak but the roof is over 15 years old, or you are preparing to sell, a free roof inspection documents current condition before problems appear.
What it costs in Culver City
Free roof inspections are included with repair estimates, though the report itself may carry a small documentation fee if you need it for a real estate transaction.
How we do it
We perform a full visual and attic inspection, then hand you findings with no obligation to move forward on any work.
What Roof Inspection Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Standard full roof inspection | $140 – $400 |
| Infrared moisture scan (flat roofs) | $240 – $420 |
| Roof estimate (detailed, urgent) | $90 – $180 |
How long does a roof inspection take in Culver City?
Most inspections take 45 to 90 minutes depending on roof size, slope, and access. Tight side yards and multiple rooflines on older Culver City homes can add time, but we will tell you before we start. Call (866) 942-4187 to book.
Do you inspect tile roofs over skip-sheathing in Culver City?
Yes. We specifically check for cracked or slipped tile, missing mortar at hips and ridges, and the condition of the sheathing below. This is the most common failure point on pre-war Culver City bungalows. Call (866) 942-4187 for an inspection.
Brands We Service in Culver City
We install and service roofing products from GAF, CertainTeed, Owens Corning, and IKO, among others. That means you choose based on warranty tier, curb appeal, and budget, not on whichever single brand we happen to stock. See our brands for the full comparison.
See the difference
Before
After
Before
After
Before
AfterPricing for Roofers in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Roof inspection (standard) | $140 – $400 |
| Infrared moisture scan | $240 – $420 |
| Roof estimate (detailed) | $90 – $180 |
| Minor tile or shingle repair | $250 – $600 |
| Flashing replacement (single penetration) | $200 – $500 |
| Flat roof patch | $350 – $900 |
| Roof replacement (asphalt, full tear-off) | $9,000 – $22,000 |
| Roof replacement (tile) | $18,000 – $45,000 |
| Underlayment replacement (tile roof re-lay) | $8,000 – $20,000 |
| Skylight replacement | $900 – $2,500 |
| Gutter installation (seamless, 200 linear ft) | $1,800 – $3,800 |
| Roof cleaning and moss treatment | $300 – $800 |
Prices in Culver City climb when we find skip-sheathing that needs plywood overlay, dry rot from decades of undetected leaks, or tile matching for historic bungalows. We quote a fixed price before work starts, and it does not change unless we uncover something structural you approve us to fix.
Neighborhoods We Serve in Culver City
We work across Culver City’s varied housing stock, from the pre-war bungalows near downtown to the mid-century tracts and newer infill throughout the city. Small lots and narrow side yards are common, so our crews arrive with equipment sized for tight access.
- Carlson Park
- Studio Village
- Blanco-Culver Crest
- Fox Hills
- Jefferson District
In most Culver City neighborhoods we can have a technician out within a few business days of your call.
Service Area – Cities Near Culver City
Beyond Culver City, our crews regularly work in neighboring Westside communities with similar coastal conditions. We serve Ladera Heights, CA, Century City, CA, Venice, CA, and Beverly Hills, CA. Each area has its own mix of housing ages and roofing styles, and our team is familiar with the material and permit requirements in each.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roofers in Culver City
For active leaks or storm damage, we prioritize emergency calls and can often respond within one to two business days depending on our schedule. Standard inspections and estimates are typically booked within a week. Call (866) 942-4187 to check current availability.
Most full roof replacements in Culver City require a city building permit. We pull permits as part of the job and schedule inspections with the city. Repairs that replace less than a certain percentage of the roof surface may not need one, and we will tell you which category your job falls into before work starts.
Yes. We serve 90230, 90231, 90232, and 90233, which covers downtown, Carlson Park, Fox Hills, and the surrounding residential neighborhoods. If you are not sure which ZIP you are in, call (866) 942-4187 and we will confirm.
For a free estimate or to schedule an inspection, call Orange County Roofing Co at (866) 942-4187. We will walk your roof, tell you what we find, and give you a fixed written price before any work begins. Home
What happens when you call
- 1A real person answersNo phone trees — talk to a local roofing pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Fixed the leak and it has stayed fixed through a wet winter. Scheduling the initial estimate took about a week and a half, so they're clearly busy."
— Latoya Hampton"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
— Whitney Schaefer"Valley had been done without proper underlayment and was leaking. Redone correctly, and he explained exactly what had been wrong so I could understand it."
— Michelle Vaughn