Owens Corning
Architectural shingles
Metal roofing
Tile roofing
GAF
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Roofing in Culver City, CA | Orange County Roofing Co
We provide independent Owens Corning roof repair and replacement across Culver City, from the bungalow blocks near downtown to the hillside streets above Jefferson Boulevard. What makes our Owens Corning work different here comes down to one thing: we know what those marine-layer summers and salt-laced onshore winds do to a shingle roof over the course of fifteen or twenty years. We carry seven major brands, Owens Corning included, so the recommendation you get is the one that fits your roof, not the one that pads a contractor’s margin. Call (866) 942-4187 for a free Culver City roof inspection.
Why Culver City Residents Choose Us for Owens Corning Service
Kurt Hensley started Orange County Roofing Co after spending his summers watching tile crews work the hillside homes in Orange’s Serrano Heights area, and he’s built this company on a simple habit: show up, look at the actual roof, and talk straight about what’s there. That matters in Culver City, where the housing stock swings from 1920s bungalows to mid-century tract homes to brand-new infill on the same block. We install and service Owens Corning Duration®, Oakridge®, WeatherGuard®, and Superscript® systems. But we also repair the roofs those shingles sit on. Flashing corroded by coastal air, underlayment that gave out under original tile, ventilation that never moved enough air through a low-pitch attic. Same crew handles inspection, repair, and replacement, so you’re not juggling three contractors to get one honest answer.
We use Owens Corning-approved accessories and quality aftermarket flashing and fasteners that meet or beat OEM spec. We’re independent. We are not authorized, sponsored, or endorsed by Owens Corning, and we won’t pretend otherwise. What that buys you is a straight repair-versus-replace call every time. Learn more about our Owens Corning sales & service.
Styles & brands we work with
Common Owens Corning Roofing Problems We Solve in Culver City
- Rusted flashing at valleys and penetrations. Culver City’s onshore air carries salt from Santa Monica Bay, and on older shingle roofs near the Westside, that salt eats through metal flashing around chimneys, skylights, and valley channels long before the shingles fail. We replace corroded flashing with Owens Corning-approved accessories and corrosion-resistant aftermarket fasteners rated for coastal exposure.
- Granule loss and brittleness on south-facing slopes. The sun here is unrelenting through summer and fall, even with the marine layer. Owens Corning 3-tab and older architectural shingles on south and southwest exposures lose granules, turn brittle, and begin to tear at the nail line. Once that starts, wind uplift on blustery winter days becomes a real risk for whole lifted sections.
- Hidden dry rot under original tile roofs. In Carlson Park and the streets near downtown, original clay and concrete tile often sits over skip-sheathing with no underlayment at all. A cracked tile from a tree branch or Santa Ana gust lets water straight into the attic. By the time you see the ceiling stain, the decking underneath may already be rotten. Re-roofing crews here find this constantly, on tile that looked perfectly fine from the street.
- Moss and algae on north-facing slopes. The marine layer keeps shaded north faces damp well into the afternoon, especially on homes tucked under mature trees near the Culver City steps or the hillside canyons. Moss lifts shingle granules, algae retains moisture, and the shingle under both ages prematurely. This is a drainage and ventilation issue as much as a shingle issue.
- Failed underlayment under low-pitch and flat sections. Many mid-century Culver City homes use low-slope roof sections over patios, carports, and additions. Once the underlayment fails, water pools and works its way into the deck. Owens Corning WeatherLock underlayment is our standard replacement on these sections because it handles standing water better than standard asphalt felt.
Owens Corning Service in Culver City: What Local Conditions Mean for Your Roof
Here’s the thing most roofing pages never tell you about Culver City. In Carlson Park and the older bungalow streets near downtown, homes built in the 1920s and 1930s got original clay tile laid directly over skip-sheathing. No underlayment. Nothing between the tile and the attic but spaced wood boards and whatever insulation settled down below. For eighty or ninety years, that worked, mostly because the tile held and the rain came hard but briefly. Then one cracked tile, one slipped piece after a windstorm, and there’s nothing stopping the water. We’ve opened these roofs and found attic framing so rotted you could push a screwdriver through what looked like solid rafter tails. Homeowners tell us the roof looked fine from the curb. It usually did.
If you own one of these bungalows, what this means is simple: a ceiling stain after a winter storm is not a small thing. It’s the visible end of a water path that may have been running for months. And when you repair these roofs, you can’t just swap a shingle or re-seat a tile and call it done. The deck underneath needs checking board by board. That’s the difference between a patch that buys you a year and a repair that actually ends the leak. A roof shouldn’t be a mystery, let’s just look at what you’ve got and go from there.
Owens Corning Models & Products We Service in Culver City
We install and repair the full Owens Corning residential lineup. Duration® is our most common recommendation for Culver City’s UV and wind exposure because of its SureNail® fabric and wind-resistance ratings. Oakridge® fits homeowners who want a reliable architectural shingle at a lower cost tier. WeatherGuard® we use most often for hip-and-ridge applications and specialty lines. Superscript® remains in use on some older homes but is largely a legacy product now. Beyond shingles, we stock Owens Corning WeatherLock underlayment, ventilation products, and flashing accessories, which means most repair jobs in Culver City don’t wait on a special order from a supplier warehouse. For tile systems, we carry the full range of Owens Corning-approved accessories alongside aftermarket components that match or exceed OEM specification.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Service Pricing in Culver City
Repair pricing in Culver City depends on what the roof actually shows when we’re on it. Here’s what we typically see. A minor shingle repair, replacing three to ten damaged shingles and resealing, runs $350 to $800, and the shingle type and roof pitch drive that number. A larger repair, say a failed valley or corroded flashing section that requires new metal and underlayment, runs $900 to $2,200. When we’re re-flashing a tile roof in Carlson Park with a full tile reset and new WeatherLock underlayment under the affected area, that’s usually $1,500 to $3,000, depending on the damage found beneath the tile. Full replacement pricing starts around $14,000 to $22,000 for a smaller bungalow in 90230 or 90232, and goes up from there with roof complexity, tile type, and the condition of the deck once the old roof’s off.
Every estimate we write is line-item, with the material and labor separated so you can see exactly where the money goes. The estimate itself is free, and we’ll walk you through what’s urgent, what can wait, and what the honest timeline is. Call (866) 942-4187 to schedule yours.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and also provide Owens Corning service in Ladera Heights and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Owens Corning Roofing in Culver City
It accelerates metal flashing corrosion and breaks down shingle granules on sun-facing slopes, same time. The salt in the onshore air from Santa Monica Bay works through flashing around chimneys and vents in fifteen years or less, long before the shingle field fails. UV, meanwhile, dries out south- and west-facing shingles, especially older 3-tabs. We check both every time we do an Owens Corning inspection in Culver City. Call us at (866) 942-4187 and we’ll tell you exactly what your roof is up against.
In Culver City homes built before 1940, the usual culprit is a cracked or slipped tile over skip-sheathing with no underlayment. The water goes straight through the gaps between the boards and into the attic, and by the time it reaches your ceiling it’s been running for a while. We find this pattern all over Carlson Park and the downtown bungalow streets.
Most of the time, yes. Owens Corning color lots shift slightly over time, so a perfect match on an older roof isn’t always possible, but we stock the common Culver City colors and can pull samples before starting. For small repairs, we’ll do everything we can to make the patch disappear into the field. For larger sections, we’ll be straight with you about whether the repaired area will be visible.
Yes. Many Culver City homes have flat or low-slope sections, often over carports, patios, or mid-century additions. We work on Owens Corning low-slope underlayment systems and flat roof assemblies, and we’ll match the repair to what the existing system is. If the current covering is beyond repair, we’ll explain your replacement options with real numbers before any work starts.
Skip-sheathing is what many original Culver City tile roofs sit on, and it changes how a re-roof gets done. The spaced boards mean you can’t just nail a modern underlayment directly over the existing deck. In most cases, we remove the tile, install new solid sheathing over or in place of the skip-sheathing, then laying the underlayment and resetting or replacing the tile. It’s more work than a standard re-roof in a tract neighborhood, and the estimate should reflect that. Call (866) 942-4187 and we’ll walk you through what your specific roof needs, no obligation.
Service Areas Near Culver City
Beyond Culver City proper, our Owens Corning crews regularly cover the neighboring Westside and South Bay communities, including El Segundo, where coastal corrosion patterns mirror what we see on the western edge of Culver City. See Owens Corning service in El Segundo for more. We also serve the hillside communities up through Tujunga, where tile roofs and steep pitches dominate. Details on Owens Corning service in Tujunga. Our full Culver City service area page lists every ZIP we cover, including 90230, 90231, 90232, and 90233.
Book Your Owens Corning Service in Culver City Today
If your Owens Corning roof is showing its age, or if you have a ceiling stain you’re tired of staring at, let’s get someone on it. Call (866) 942-4187 to schedule a free estimate. Most Culver City inspections can be scheduled within a day or two, and the roofing work itself we’ll schedule around weather and your availability.
Written by Kurt Hensley, Owner at Orange County Roofing Co, serving Culver City and surrounding areas.