Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
GAF Roofing in Long Beach, CA | Orange County Roofing Co
We provide independent GAF roofing service across Long Beach, from flat-roof repairs on 1920s bungalows in Belmont Shore to full Timberline tear-offs on post-war tracts in 90808. What makes our GAF work here different is that we know how these shingles and membranes actually behave under Long Beach’s salt-air marine layer and persistent morning fog. If you need a GAF roof repaired, inspected, or replaced, call (866) 942-4187 for a free estimate. We’re not manufacturer-affiliated, and we’re not authorized by GAF. We’re a local Orange County roofing company that stocks and installs GAF product because it’s a solid line, not because anyone pays us to push it.
Why Long Beach Residents Choose Us for GAF Service
We’ve torn into enough GAF Timberline and TAMKO-covered decks across Long Beach’s pre-war bungalows to know exactly how their shingles age under a salt-air marine layer, and when a repair will actually hold versus when the deck or flashings need attention. Kurt Hensley, our owner, grew up watching roof crews work tile roofs on hillside homes in Orange before he ever picked up a nail gun. That instinct for what’s happening under the surface carries into every GAF inspection we do in Long Beach. We carry seven major brands, GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, Boral, so recommending a GAF product happens because it fits your roof, not because we’ve got a quota. For more on how we sell and service the line, see our GAF sales & service page.
Styles & brands we work with
Common GAF Roofing Problems We Solve in Long Beach
Most calls we get from Long Beach homeowners are not “my roof is falling apart.” They’re a slow drip in a corner, a dark streak on a ceiling, or a shingle that lifted and never sat back down. Here’s what we typically find, and why it happens here more than inland:
- Ponding water on GAF Liberty and EverGuard TPO flat roofs in 90802 and 90803. Long Beach’s fog and morning dew don’t burn off fast on low-slope decks, so water sits at seams and drain laps. Over time, those laps lift, and the deck underneath stays saturated well after the visible surface dries. The roof wasn’t installed wrong. The climate here works against flat decks more than almost anywhere in LA County.
- Rusted fasteners, drip edge, and vent boots under Timberline HDZ installations near the port. Salt air off the Port of Long Beach accelerates corrosion faster than most people expect. We’ve seen capped nails and galvanized flashings on ten-year-old roofs that look like they’ve spent thirty years in dry inland air. The shingle face looks fine. The metal holding the roof together does not.
- Granule loss and algae streaking on older Timberline architectural shingles in 90805 and 90808. The marine layer keeps roof surfaces damp for hours longer than inland neighborhoods, so algae takes hold and granule adhesion breaks down faster. A roof that would look normal in Corona shows its age five years quicker two miles from the water.
- Soft wood sheathing under low-slope parapet flashings in Belmont Shore and Alamitos Beach. Fog never fully dries these decks. The wood sheathing rots from the inside out at the parapet line, and by the time you see a leak inside, the structural layer is already compromised. This is the most expensive GAF repair we do in Long Beach, because it usually means sheathing replacement, not just new shingles.
- Flashing failures at chimneys, skylights, and roof-to-wall transitions on 1910s through 1930s homes. Original metal flashings on Craftsman and Spanish Colonial bungalows rust through at the bends and seams. GAF roof systems are only as good as the flashing at penetrations. When the flashing goes, the shingles around it follow.
GAF Service in Long Beach: What Local Conditions Mean for Your Equipment
Re-roofs in Belmont Shore and Alamitos Beach routinely expose original 1920s wood sheathing that is soft from decades of trapped fog condensation under low-slope decks. That means a GAF installation here often involves sheathing replacement, not simply laying new shingles over the old roof. On a 1928 Spanish Colonial bungalow off the Ocean Blvd corridor, our crew pulled the old cap sheet off a low-slope rear deck and found the original 1x sheathing delaminating where fog condensation had been trapped for years. We replaced the soft boarding, rebuilt the parapet flashing with GAF-approved metal, and capped it with GAF Liberty SBS self-adhered membrane so the deck could finally dry between marine-layer mornings. If you’re in a 90802, 90803, or 90804 ZIP and you’ve got a flat or low-slope roof, this is the reality you’re likely facing under the surface. A roof shouldn’t be a mystery, let’s just look at what you’ve got and go from there.
GAF Models & Products We Service in Long Beach
We work on the full residential GAF line you’re likely to find on Long Beach roofs. That includes Timberline HDZ and Timberline UHDZ architectural shingles, GAF Liberty SBS self-adhered cap sheet for low-slope and flat decks, GAF EverGuard TPO membrane for flat commercial-style residential roofs, and the accessory system that holds it all together, Pro-Start starter strips and Seal-A-Ridge hip and ridge caps. We use GAF’s own accessories on repairs because mismatched aftermarket flashings and boots are what rust first along the coast. If your deck is sound, we repair. If the sheathing or flashing detail is already compromised, we’ll tell you a full tear-off is the honest call.
See the difference
Before
After
Before
After
Before
AfterGAF Service Pricing in Long Beach
What you’ll pay depends on what we find. A straightforward flashing repair or a few shingles replaced might run a few hundred dollars. A flat-roof patch with GAF Liberty SBS membrane on a small Belmont Shore deck typically lands in the low thousands. A full GAF tear-off with sheathing replacement on a 1920s bungalow in Alamitos Beach runs higher, because the wood layer underneath drives the labor and material cost more than the shingles themselves. Our free estimate tells you what the roof actually needs, nothing more. Call (866) 942-4187 and we’ll put a written line-item quote in your hand.
Serving Long Beach, CA — Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – GAF Roofing in Long Beach
That streaking is almost always algae taking hold on a surface that stays damp far longer than inland roofs. Long Beach’s marine layer means your shingles don’t dry out by mid-morning the way they do in Corona or Riverside. Older Timberline architectural shingles hold moisture in their granule layer, and algae follows. It’s cosmetic at first, but over years, the damp cycling accelerates granule loss. We can clean and treat it, and if the shingles are too far gone, we’ll tell you straight. Call (866) 942-4187 for an inspection and exact quote.
Sometimes, but rarely on a Belmont Shore bungalow. If the existing roof is one layer and the deck underneath is still solid, a layover is possible. But most of the 1920s homes we open up in Belmont Shore have original wood sheathing that’s softened from decades of fog condensation trapped under the old roof. Laying new GAF shingles over compromised sheathing just hides the problem for a few years. We’ll inspect the deck before recommending anything.
Usually drainage, not membrane. GAF Liberty SBS is a solid low-slope product, but any membrane will pond if the deck doesn’t slope enough toward drains or scuppers, and Long Beach’s fog means ponded water never fully evaporates. The fix might be as simple as a new drain lap or adding taper insulation, or it might require rebuilding the roof’s slope. We’ll diagnose it before touching a membrane. Call (866) 942-4187 for a free estimate and we’ll tell you which it is.
Faster than most homeowners realize. The constant onshore salt air corrodes galvanized flashing, vent boots, and fasteners years before the shingle face shows any wear. We’ve replaced rusted-through drip edge on roofs where the Timberline shingles above still looked nearly new. If your home is within a few miles of the port or the coast, we recommend GAF-approved corrosion-resistant metal at all penetrations and a fastener check during any repair, because the failure point is almost always the metal, not the shingle.
Yes, if the pitch is within GAF’s spec and the underlayment is right. Post-war tract homes in 90805 and 90808 often run shallower pitches than manufacturers’ ideal range, which means proper underlayment and starter strip become critical. We’ve installed Timberline HDZ on these roofs successfully for years, but we always verify the deck and pitch before recommending the product. For an exact quote on your roof, call (866) 942-4187. Estimates are free.
Service Areas Near Long Beach
Long Beach is the core of our coastal service area, but we also work nearby in the wider Long Beach service area. Homeowners in Corona, Home Gardens, Norco, Eastvale, and Jurupa Valley call us for the same GAF expertise, minus the salt-air factor. If you’re closer to those areas, see GAF service in Tustin or GAF service in Placentia for more local detail.
Book Your GAF Service in Long Beach Today
Whether it’s a repair, an inspection, or a full replacement, we’ll give you a straight answer and a written quote. Call (866) 942-4187 to schedule your free estimate.
Written by Kurt Hensley, Owner at Orange County Roofing Co, serving Long Beach and the surrounding Orange County area.