Owens Corning Roofing in Murrieta, CA

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roofing in Murrieta, CA | Orange County Roofing Co

We provide independent Owens Corning repair in Murrieta Hot Springs and across Murrieta, and the thing that makes our work here different is simple: most Murrieta tile roofs fail from underneath, not on top. The concrete flat tile you see from the street usually has decades of life left. What’s dead is the builder-grade felt under it, which is why our Owens Corning work in this city leans heavily toward underlayment replacement and lift-and-relay rather than full tear-offs. Call (866) 942-4187 for a straight answer on what your roof actually needs.

Call (866) 942-4187

We’re Owens Corning sales & service specialists in the sense that we know these products down to how they behave under Murrieta’s UV and wind loads. We’re not authorized by Owens Corning and don’t claim any manufacturer partnership. We’re a roofing company that installs and repairs their systems, and we’ll tell you exactly where Owens Corning materials are the right call and where an aftermarket part does a better job.

Why Murrieta Residents Choose Us for Owens Corning Service

Kurt Hensley, our owner, spent the better part of two decades working roofs across Southern California before launching Orange County Roofing Co. He’s seen enough improperly flashed chimneys and delaminated underlayment to know that the roof you can’t see is the one that fails first. That’s especially true in Murrieta, where the original roofs in the 1990s and 2000s tracts have all hit their service limit within a few years of each other.

We carry seven major brands: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters because nobody here has to sell you Owens Corning. If Owens Corning is the right product for your roof and your warranty goals, we’ll tell you. If another manufacturer’s underlayment or shingle fits better, we’ll tell you that too. The right material wins, not the one with the highest margin for us.

Our inspection is a standalone service, not a sales pitch with a clipboard attached. You can schedule one after a wind event, before buying or selling a home, or just because your roof turned 25 and you want to know where it stands. A roof shouldn’t be a mystery – let’s just look at what you’ve got and go from there.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Common Owens Corning Roofing Problems We Solve in Murrieta

  • Delaminated underlayment over original felt on tile tear-offs. When attic temps in Murrieta hit 140°F in July and August, Owens Corning underlayment installed over existing felt can wrinkle and separate. On a lift-and-relay job, the old felt has to come off completely, down to the deck. Skip that step and the new underlayment fails before the tile above it does.
  • Wind-lifted field tile and peeled ridge caps after Santa Ana events. The wind corridor off the Santa Rosa Plateau funnels through the I-15 and hits Murrieta’s two-story tracts hard. Tile gets lifted, ridge caps peel, and rain finds those exposed nail lines in winter. We inspect after wind events and reset tile with new fasteners and caps where they’re actually needed.
  • UV-baked sealant and cracked pipe boots. The inland sun here doesn’t just age tile. It dries out the rubber boots around plumbing vents and exhaust pipes until they split. Tiny vent-boot cracks become ceiling stains months before any tile looks wrong from the ground. We replace boots with quality aftermarket parts that outlast the originals.
  • Failed flashing at wall-to-roof transitions on two-story stucco homes. The stucco-over-sheathing construction common in Murrieta’s gated tracts wasn’t built for 25 years of thermal cycling. Flashing at walls and valleys fails first, and the original weep details were never designed to handle this much expansion and contraction. We repair or replace flashing rather than papering over the problem with sealant.
  • Builder-grade felt fully exhausted beneath intact tile. The classic Murrieta job. Tile looks fine. Roof leaks anyway. The 25-year felt has disintegrated, and the only real fix is a lift-and-relay: remove the tile, strip the old felt, install new Owens Corning ProArmor or WeatherLock underlayment, and reset the original tile with new ridge caps.

Owens Corning Service in Murrieta: What Local Conditions Mean for Your Roof

Here’s what makes Murrieta different from Riverside, from Owens Corning repair in Temecula‘s older core, from almost anywhere else in the Inland Empire. Murrieta is one of the fastest-grown suburbs in the region, and the master-planned tracts off Clinton Keith and Winchester roads were built in a wave. Thousands of homes in 92562 and 92563 went up within a few years of each other in the late 1990s and early 2000s, nearly all with concrete flat-tile or clay-tile roofs over builder-grade felt. Those roofs are now crossing the 25 to 30 year mark at the same time.

That means Murrieta is a first big re-roof wave town. Not a mixed-age market where you spot a failing roof from the curb. Here, the tile looks intact while the felt beneath it has already quit. If you live in a gated tract off Clinton Keith or Winchester and you’ve noticed a ceiling stain after winter rain, the odds are high the tile isn’t your problem. The underlayment is. We see it every week.

On a two-story stucco home in a gated tract off Clinton Keith, our crew found exactly that: concrete flat tile that looked perfectly fine from the ground, but a ceiling stain after the first winter rain. We lifted and relayed the original tile, stripped the failed 25-year felt down to the deck, installed fresh Owens Corning ProArmor synthetic underlayment, and reset the tile with new ridge caps and pipe boots. No full tear-off needed. The homeowner kept their original tile, saved thousands, and the roof is now watertight for decades.

Owens Corning Models & Products We Service in Murrieta

We install, repair, and inspect Owens Corning Duration architectural shingles, Supreme and Oakridge architectural shingles, WeatherLock underlayment systems, and ProArmor synthetic underlayment. For Murrieta’s tile roof stock, ProArmor and WeatherLock are the products we reach for most often on lift-and-relay jobs. They’re tough against UV and handle the thermal swings we get inland.

We match Owens Corning materials to the actual roof system. That means using OC underlayment and accessories where they’re the right call, and quality aftermarket flashing and vent boots where those outperform the builder-grade originals. We don’t stock every Owens Corning accessory locally in Murrieta, but our Sedco Hills Owens Corning service connections and supplier relationships across Southern California get us what we need quickly enough that you’re not waiting weeks for a routine repair.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Owens Corning Service Pricing in Murrieta

Most Murrieta homes need honest numbers, not vague ballparks. Here’s what you can expect for common Owens Corning-related work in this market:

  • Roof inspection (standalone): $200 – $350
  • Minor tile repair (resetting lifted tile, replacing a few cracked tiles, sealing a vent boot): $350 – $900
  • Flashing repair at walls or valleys: $450 – $1,200 depending on linear footage and access
  • Tile lift-and-relay with new Owens Corning underlayment: $5,000 – $12,000 depending on roof size, pitch, and tile condition
  • Full Owens Corning shingle replacement (if switching from tile): $12,000 – $25,000+

What drives the price in Murrieta is usually the underlayment work, not the tile. If your felt is failed, the tile has to come up, and that’s labor. Our free estimates include a written line-item quote so you see exactly what’s being replaced and why. Call (866) 942-4187 to schedule yours. No pressure, just numbers.

Serving Murrieta, CA — Our Local Coverage Area

We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Owens Corning Roofing in Murrieta

Service Areas Near Murrieta

We serve Murrieta, Temecula, Wildomar, Lake Elsinore, and Menifee in the 92562, 92563, and 92564 ZIP codes. Orange County Roofing Co also provides Owens Corning service in South El Monte and Owens Corning service in Santa Fe Springs. For full details on our coverage, see our Murrieta service area page.

Book Your Owens Corning Service in Murrieta Today

If your Murrieta roof is 25 years old or showing signs of a leak, don’t wait for the next winter rain. Call (866) 942-4187 to schedule a free estimate or a standalone inspection. We’ll tell you exactly what your roof needs, whether it’s an Owens Corning underlayment replacement or a simple flashing repair.

Written by Kurt Hensley, Owner at Orange County Roofing Co, serving Murrieta and Southern California.

Need Roofing help in Murrieta? Licensed & insured · Written quotes before work starts response · free estimates
Call (866) 942-4187
Areas We Serve

Request a Free Estimate in Murrieta

Tell us what you need — Orange County Roofing Co responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to being contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch